Laboratory Beater HV-10

Add to Quote Cart
Product Added to Quote Successfully.
View Quote
Categories: , , Tags: ,

Model: HV-10

The HV-10 is a laboratory beater useful for pilot beating of pulps in the Q.C. (quality control). Also, for research and development) of pulps. It has a high capacity. The design of the laboratory beater is sturdy. Thus, it allows usage of this machine in production lines of paper and boards.

The knives of the beating roll and the bed plate are both stainless steel. They have adjustable contact pressure. By the means of integrating precise balance.

* Operates with mass consistency from 4 to 10%; * Beater tub made of cast-iron with 10L capacity, protected internally against corrosion with high resistant epoxy hard coating, with inspection windows and bascule access door; * Pressure between beating roll and bedplate adjusted by precision integrated balance, with stainless steel knives and counter knives; * Heavy duty 5.5 kW (7.5 HP), 1750 rpm, IP 55 drive motor; * Transmission made by heavy duty pulley ensures that the beating roll is driven constantly with 547 rpm and relative cutting speed of 10 m/s between stainless steel knives and counter-knives; * Closed beating loop driven by the refiner itself has lower collection point for beaten pulp and a cooling system on the beating tub's lid, ensuring that all the pulp is refined homogenously while it is circulating; * Start system offers high torque start and high revolution operation which enables the equipment to be started even fully loaded; * Heavy duty supporting structure made of welded structural steel profiles for direct fixation of the beater on the ground floor.
Power supply 220 VCA, 60 Hz, 5.5 kW, three phase. Others available under request. * Water supply 3 bar, clean, pure, 2.0 m3/h * Drainage point required * Dimensions (1600 x 750 x 1300) mm (W x L x H) * Weight 545 kg * Optional accessories: Filter for water inlet model GS 200UV - 5L/min according to ISO 14487

By Test Type