Our supplier has 20 years of designing and manufacturing vibration sensors based on proprietary Microelectromechanical System (MEMS), bonded gage and piezoelectric ceramic/film technologies. Voltage mode piezoelectric is the most popular accelerometer design due to its high level output and wide bandwidth.
We offer voltage mode accelerometers in the traditional 3-wire or 2-wire (IEPE) confi gurations. Charge mode piezoelectric accelerometers measure shock and vibration in high temperature environments. In addition to its high temperature operating capability when used with a high quality charge amplifi er, a charge mode accelerometer off ers dynamic range scalability. To measure motion (velocity, displacement) accurately, an accelerometer or with DC response is required. Incorporating MEMS technologies and the latest analog and digital ASICs, our DC accelerometers off er high performance and exceptional value. All products are EAR99 and RoHS compliant.
Embedded Accelerometers - MEMS DC
|
Package
|
3022, 3028
|
3052A, 3058A
|
3038
|
3255A
|
|
Type
|
Board level
|
Board level
|
Board level
|
Board level
|
|
Feature Range
|
±2g to ±100g
|
±2g to ±100g
|
±50g to ±6,000g
|
±25g to ±100g
|
|
Operating Temperature
|
-40°C to 125°C
|
-40°C to 125°C
|
-54°C to 125°C
|
-40°C to 125°C
|
|
Unique Features
|
mV output, critically gas damped
Board and screw mount options
Pin or solder pad option
|
Temperature compensated
Board and screw mount options
Pin or solder pad option
|
Hermetically sealed
High over-range protection
Gas damping
|
Amplified, signal conditioned
Gas damping
Bidirectional mounting
|
|
Accuracy
|
±1.0% non-linearity
|
±1.0% non-linearity
|
±1.0% non-linearity
|
±1.0% non-linearity
|
|
Dimensions (mm)
|
22.8 x 15.2 x 5.3
|
22.8 x 15.2 x 5.3
|
7.5 x 7.5 x 3.3
|
13.5 x 7.6 x 3.8
|
|
Typical Applications
|
Vibration and shock monitoring, tilt applications, motion
control, impact testing
|
Vibration and shock monitoring,
tilt applications, motion
control, impact testing
|
Vibration and shock monitoring, embedded systems, shock testing, safe and arm
|
Vibration and shock monitoring,
aerospace testing, impact testing, transportation
|
Embedded Accelerometers - Piezoelectric
|
Package
|
TO-5
|
TO-8
|
Board level
|
SMD
|
SMD
|
|
Type
|
Adhesive (Stud
mount option)
|
Adhesive (Stud
mount option)
|
SMD
|
Board mount
|
Board mount
|
|
Feature Range
|
±20g to ±500g
|
±4g to ±50g
|
±25g to ±500g
|
±25g to ±500g
|
±2,000g to ±6,000g
|
|
Operating Temperature
|
|
|
|
|
|
|
Unique Features
|
Hermetically sealed
Case grounded design
Bandwidth to 12 kHz
|
Hermetically sealed
Case grounded design
Bandwidth to 8 kHz
|
Small size, low cost
Dynamic response
Wide >6000Hz
bandwidth
|
SMT mount, triaxial
Wide bandwidth >6000Hz
Low power consumption
|
SMT mount, triaxial
Wide bandwidth >6,000Hz
Low power consumption
|
|
Accuracy
|
±1.0% non-linearity
|
±1.0% non-linearity
|
±2.0% non-linearity
|
±2.0% non-linearity
|
±2.0% non-linearity
|
|
Dimensions (mm)
|
Ø8.9 x 10.2
|
Ø15.2 x 16.6
|
8.9 x 8.9 x 4.2
|
18.8 x 14.2 x 4.3
|
18.8 x 14.2 x 4.3
|
|
Typical Applications
|
Machine monitoring, data loggers, permanent structures
|
Machine monitoring, data loggers, embedded
applications
|
Embedded predictive
maintenance, condition monitoring, data loggers
|
Data logging, asset monitoring, impact monitoring
|
Data logging, asset monitoring, impact monitoring
|
Plug and Play Accelerometers - Uniaxial DC Response
|
Package
|
Anodized aluminum
|
Anodized aluminum
|
Anodized aluminum
|
|
Type
|
Screw mount
|
Adhesive and Screw mount
|
adhesive mount
|
|
Fs Range
|
±25g to ±2,000g
|
±50g to ±6,000g
|
±50g to ±6,000g
|
|
Operating Temperature
|
-20°C to 80°C
|
-40°C to 90°C
|
-20°C to 85°C
|
|
Unique Features
|
Critically damped
Euro NCAP certified
Compact
|
SAE-J211/2570 and ISO-6487 compliant
Gas damping, thin profile
Over-range stops
|
Most reliable crush zone
accelerometer availbale
Rugged, water proof
Mounting on any sides of housing
|
|
Accuracy
|
±1.0% non-linearity
|
±1.0% non-linearity
|
±1.0% non-linearity
|
|
Dimensions (mm)
|
16.7 x 10.0 x 5.0
|
11.2 x 10.1 x 3.8
|
14.0 x 6.3 x 6.3
|
|
Typical Applications
|
Pedestrian crash testing, Euro NCAP testing
|
Vibration and shock testing, safety impact testing, side-impact testing
|
On-vehicle crash and impact testing,
drop testing, harsh environment
|
|
Package
|
Anodized aluminum
|
Anodized aluminum
|
|
Type
|
Screw mount
|
Adhesive/screw mount
|
|
FS Range
|
±50g to ±6,000g
|
±50g to ±2,000g
|
|
Unique Features
|
SAE-J211/2570 and ISO-6487 compliant
ATD dummy certified
Market performance leader
|
Cube form factor, low noise cable
Adhesive or screw mount
Over-range stops
|
|
Operating Temperature
|
-40°C to 121°C
|
-20°C to 85°C
|
|
Accuracy
|
±0.7% non-linearity
|
±1.0% non-linearity
|
|
Dimensions (mm)
|
13.1 x 10.0 x 5.0
|
8.9 x 8.9 x 9.4
|
|
Typical Applications
|
In-dummy crash and impact testing, Euro NCAP testing
|
On-vehicle crash and impact testing, vibration and shock monitoring
|
|
Package
|
Stainless steel
|
Anodized aluminum
|
Stainless steel
|
|
Type
|
Screw/stud mount
|
Screw mount
|
Screw mount
|
|
FS Range
|
±5g to ±10,000g
|
±2g to ±200g
|
±2g to ±200g
|
|
Operating Temperature
|
-40°C to 120°C
|
-54°C to 125°C
|
-55°C to 125°C
|
|
Unique Features
|
Rugged housing
Critically damped
20,000 g over-range protection
|
UltraStable MEMS
Low noise, signal conditioned
<2% TEB (total error band)
|
UltraStable MEMS
Hermetically sealed
<2% TEB (total error band)
|
|
Accuracy
|
±1.0% non-linearity
|
±1.0% non-linearity
|
±1.0% non-linearity
|
|
Dimensions (mm)
|
D0: 19.0 x 19.0 x 7.6
D1S: 12.7 x 12.7 x 15.2
D5; 14.2 x 12.7 x 5.6
|
21.1 x 21.6 x 7.6
|
25.4 x 29.1 x 7.6
|
|
Typical Applications
|
Impact and shock testing, destructive testing, engine testing
|
Flight testing on engines, flutter test, road load and transportation testing
|
Low frequency monitoring, road testing, motion analysis
|
Plug and Play Accelerometers - Triaxial DC Response
|
Package
|
Anodized aluminum
|
Stainless steel
|
Anodized alumin
|
Molded plastic
|
Nitrile rubber pad
|
|
Type
|
Adhesive mount
|
Screw mount
|
Screw mount
|
Screw mount
|
Removable
|
|
Fs Range
|
±50 to ±2,000g
|
±50 to ±2,000g
|
±2g to ±200g
|
±2g to ±6g
|
±25g
|
|
Operating Temperature
|
-20°C to 85°C
|
-20°C to 85°C
|
-40°C to 115°C
|
-40°C to 85°C
|
-20°C to 85°C
|
|
Unique Features
|
Low cost
Gas damping
Low power
|
World SID
Gas damping
Low power
|
UltraStable MEMS Low noise, signal
conditioned
<2% TEB (total
error band)
|
Low cost
Biaxial, with
triaxial option
DC response
|
606M2 IEPE option
Triaxial, hermetic
Seat pad accelerometer
|
|
Accuracy
|
±1.0% non-linearity
|
±1.0% non-linearity
|
±1.0% non-linearity
|
±1.0% non-linearity
|
±1.0% non-linearity
|
|
Dimensions (mm)
|
18.3 x 13.2 x 7.1
|
12.7 x 12.7 x 12.7
|
26.2 x 26.2 x 23.4
|
71.2 x 40.0 x 15.2
|
199 x 4
|
|
Typical Applications
|
Auto safety, passenger comfort, transportation, NVH analysis
|
Auto safety, in dummy crash, on vehicle crash
|
Road testing, motion
control, structural testing
|
Structural monitoring, seismic array, bridge testing
|
Off road equipment, amusement rides, commercial aircraft
|
|
Package
|
Titanium
|
Titanium
|
Stainless steel
|
Nickel plated aluminum
|
|
Type
|
Screw mount
|
Screw mount
|
Screw mount
|
Screw mount
|
|
FS Range
|
±2g to ±200g
|
±2g to ±200g
|
±2g to ±50g
|
±2g to ±15g
|
|
Unique Features
|
UltraStable MEMS
Welded connector, hermetic
<2% TEB (total error band)
|
UltraStable MEMS
Compact, rugged and double shielded cable
<2% TEB (total error band)
|
Low noise ranges
Temperature compensated
High over-range
|
Digital triaxial accelerometer
Smart, onboard processing
Temperature output included
|
|
Operating Temperature
|
-55°C to 125°C
|
-55°C to 125°C
|
-40°C to 115°C
|
-40°C to 85°C
|
|
Accuracy
|
±0.1% non-linearity
|
±0.1% non-linearity
|
±1.0% non-linearity
|
±0.25% non-linearity
|
|
Dimensions (mm)
|
22.9 x 22.9 x 17.1
|
22.9 x 22.9 x 16.0
|
34.5 x 34.5 x 31.2
|
36.5 x 25.4 x 17.5
|
|
Typical Applications
|
Road testing, motion control, flight testing
|
Road testing, motion control, flight testing
|
Structural monitoring, bridge testing
|
Smart sensor function, vibration monitoring and alarm functions
|
Plug and play Accelerometers - IEPE AC Response
|
Package
|
Stainless steel/titanium
|
Titanium
|
Stainless steel
|
|
Type
|
Center-hole mount
|
Adhesive mount
|
Adhesive mounting
|
|
FS Range
|
±50g to ±2,000g
|
±50g to ±2,000g
|
±50g to ±500g
|
|
Operating Temperature
|
7100A: -55°C to 150°C
7101A: -55°C to 125°C
|
-55°C to +125°C
|
-55°C to +125°C
|
|
Unique Features
|
Single axis, shear mode
Isolated mounting surface
Wide bandwidth, >10 kHz
|
Single axis, shear mode
Wide bandwidth
|
Single axis, shear mode
Wide bandwidth
Small size
|
|
Dimensions (mm)
|
7100A: 9.9 x 22.3, 7101A: 5.8 x 14.5
|
4.4 x 11.9
|
9.5 x 10.2
|
|
Typical Applications
|
Flight testing, general purpose, vibration monitoring
|
Small structures monitoring, minimal mass loading, general purpose testing
|
Vibration monitoring, modal testing, general purpose
|
|
Package
|
Stainless steel |
Titanium |
Stainless steel |
|
Type
|
Stud mounting |
Adhesive/stud mounting |
Adhesive mounting |
|
FS Range
|
±50g to ±2,000g |
±50g to ±2,000g |
±50g to ±500g |
|
Unique Features
|
Single axis, shear mode
Wide bandwidth
|
Triaxial, shear mode
>12 kHz bandwidth
Hermetically sealed
|
Triaxial, through hole mount
Case isolated, internally shielded
Hermetically sealed
|
|
Operating Temperature
|
-55°C to 125°C |
-55°C to 125°C |
-55°C to 125°C |
|
Dimensions (mm)
|
7104A: 11.11 x 14.10 ,7105A: 11.11 x 19.05 |
7131A: 11.0 x 11.0 x 11.0, 7132A: 15.2 x 15.2 x 14.5 |
28.6 x 14.0 |
|
Typical Applications
|
General purpose IEPE accel, vibration monitoring, lab testing |
General purpose, modal testing, vibration monitoring |
AD&M monitoring, HUMS, structural applications |
|
Package
|
Stainless steel |
Stainless steel |
Stainless steel |
Stainless steel |
|
Type
|
Stud mount |
Stud/center-hole mount |
Stud mount |
Stud mount |
|
FS Range
|
±5g to ±500g |
±10g to ±100g |
±50g to ±500g |
±5g to ±500g |
|
Operating Temperature
|
-55°C to +125°C |
-55°C to 125°C |
-40°C to 100°C |
-55°C to +125°C |
|
Unique Features
|
Industrial accelerometer
Case isolated, internal shielding
Low cost
|
Industrial accelerometer
Case isolated, internal shielding
Reverse wiring protection
|
Industrial accelerometer
Case isolated, internal shielding
Low cost, molded strain relief
|
Certified for wind tubines
±2,500VAC lightning protection
Case isolated, internal shielding
|
|
Dimensions (mm)
|
22.2 x 50.8 |
22.2 x 48.3 |
14.3 x 45.3 |
22.2 x 50.8 |
|
Typical Applications
|
Industrial applications, machine monitoring, wind turbines |
Industrial applications, machine monitoring, intrinsic safety |
Industrial applications, machine monitoring |
Industrial applications, machine monitoring, wind turbines |
PLUG AND PLAY ACCELEROMETERS - 4-20mA AC
|
Package
|
Stainless steel
|
Stainless steel
|
|
Type
|
Stud/center-hole mount
|
Stud/center-hole mount
|
|
FS Range
|
5g to 50g
|
0.5in/sec to 5.0in/sec
|
|
Operating Temperature
|
-40°C to 85°C
|
-40°C to 85°C
|
|
Unique Features
|
Industrial 4-20mA accelerometer
Case isolated, internal shielding
Top mount or side mount connector
|
Industiral 4-20mA velocity transmitter
Case isolated, internal shielding
Top mount or side mount connector
|
|
Dimensions (mm)
|
22.2 x 48.3
|
22.2 x 48.3
|
|
Typical Applications
|
Industrial applications, machine monitoring, intrinsic safety
|
Industrial applications, machine monitoring, intrinsic safety
|
PLUG AND PLAY ACCELEROMETERS - 3 Wire Voltage AC
| Package |
Anodized aluminum |
| Type |
Screw mount |
| FS Range |
±25g to ±6,000g |
| Operating Temperature |
-40°C to 125°C |
| Unique Features |
Triaxial PE accel, low cost
Environmentally sealed, rugged
<22μA current consumption
|
| Dimensions (mm) |
25.4 x 21.6 x 10.8 |
| Typical Applications |
Impact and shock testing, R&D and lab applications |
PLUG AND PLAY ACCELEROMETERS - PE Charge
|
Package
|
Stainless steel |
Titanium |
Titanium |
|
Type
|
Center-hole mount |
Center-hole mount |
Adhesive mounting |
|
Sensitivity
|
7pC/g to 20pC/g |
5.6pC/g |
1.8pC/g |
|
Operating Temperature
|
-73°C to 260°C |
-73°C to 260°C |
-73°C to 260°C |
|
Unique Features
|
Single axis, shear mode
Hermetically sealed
Isolated mounting surface
|
Single axis, shear mode
Hermetically sealed
Bandwidth to >15 kHz
|
Single axis, shear mode
Hermetically sealed
Miniature, <1 gram
|
|
Dimensions (mm)
|
8.4 x 22.3 |
5.8 x 14.5 |
4.4 x 11.9 |
|
Typical Applications
|
Gearbox vibration monitoring, flight test, high temp. applications |
Gearbox vibration monitoring, flight test, high temp. applications |
Small structures monitoring, minimal mass loading, high temp. applications |
|
Package
|
Stainless steel
|
Stainless steel
|
Titanium
|
|
Type
|
Stud mount
|
Stud mounting
|
Adhesive mount
|
|
Sennsitivity
|
5.6pC/g
|
30pC/g to 100pC/g
|
1.8pC/g1.8pC/g
|
|
Operating Temperature
|
-73°C to 260°C
|
-73°C to 260°C
|
-73°C to 260°C
|
|
Unique Features
|
Single axis, shear mode
Top and side connector option
>15 kHz Bandwidth
|
Single axis, shear mode
>12 kHz bandwidth
High sensitivity
|
Triaxial, shear mode
Miniature, light weight
>10 kHz bandwidth
|
|
Dimensions (mm)
|
7504A; 11.1 x 14.1, 7505A; 11.1 x 19.0
|
15.0 x 15.0
|
11.0 x 13.6 x 11.0
|
|
Typical Applications
|
Small structures monitoring, general purpose, high temp. applications
|
Low frequency vibration, general purpose, high temp. applications
|
High temp. applications, flight testing, structural monitoring
|
Amplifiers
|
Package
|
Bench top |
In-line charge converter |
Inline amplifier with auto-zero |
Bench top |
Bench top |
|
No. of Channels
|
3 |
1 |
1 |
1 |
4 |
|
Gain Range
|
x0.001 to 9999 |
x0.1, 1, 10 |
x10, 25, 50, 100, 200 |
x1, 10 |
x0.001 to 999.9 |
|
Unique Features
|
Universal DC amplifier
Low noise operation with auto-zero
For bridge type sensors
|
Low noise, small package
BNC male or female
Wide bandwidth
|
±1.5 mV auto-zero
140A for bridge type sensor, 142A for strain gages
5 to 30 VDC excitation
|
Economical IEPE power supply
Portable, compact
Rechargeable battery
|
Charge and IEPE conditioner
Sensitivity normalization
Support IEEE 1451.4 TEDS
|
|
Dimensions (mm)
|
301 x 258 x 102 |
Ø13.8 x 52.2 |
57 x 25 x 13 |
101 x 83 x 32 |
310 x 180 x 115 |
|
Typical Applications
|
Instrumentation labs, test benches, R&D facilities |
Instrumentation labs,high temperature testing PE accelerometer |
Instrumentation labs, test benches, R&D facilities |
Instrumentation |
Instrumentation labs, PE/IEPE sensors |
Amplified, signal conditioned
• Gas damping
• Bidirectional mounting
Adhesive (Stud
mount option)
±1.0% non-linearity
Low cost
• Gas damping
• Low power