MiniFlex CLD

首页 » MiniFlex CLD

All foamers measure the density of their product.  Not all foamers, however, measure foam hardness.   Foam hardness has a major influence on the comfort factor of the furniture, bedding or automotive product in which it  is  used.  Variation in hardness is one of the most common complaints from customers.

Trying to judge the hardness of a foam sample by hand-feel is almost impossible.   Every person will have a different opinion.  To nsure consistent Quality Control of foam production, it is necessary to have an industry recognised foam hardness test procedure that will give an accurate, recordable value.

The foam industry measures foam hardness by various different tests.  These can be grouped as either ILD (Indentation Load Deflection) or CLD (Compression Load Deflection) type tests.

The test procedure first measures the thickness of the foam sample (pre-load). It is then compressed 3 times to 30% of its original thickness (pre-flex) at a defined speed.  Finally, the sample is compressed to 60% of its original thickness and the force necessary to do this is measured and recorded.  This force, normally expressed as pressure in kilopascals (kPa), is the hardness value.

• Flexible cellular polyurethane • Latex foam • Rubber Foam • Foam components
• AS 2282.8 • AS 2281 • ASTM D3574 • ISO 3386: 1984 • GB 10807 • JIS K 6400
• Bench top instrument • Fully automatic operation • Test area of 10cm x 10cm x 5cm thick • Auto Calibration feature • Stepper Motor Drive (up to 40kg force) • Compression Load Range: 0-400N • Compression Thickness Resolution: Better than 0.25mm • Accuracy better than +0.5%